3d panels for the bathroom

When planning repairs in the bathroom, you always want the result to be effective, and the costs are minimal. To save the budget and at the same time give the bathroom a stunning look, PVC panels with a 3D pattern will help.

They will not only unrecognizably change even a small bath, but will also resist moisture and fungus well for a long time.

Features, advantages and disadvantages

Plastic panels with a 3D effect are a great alternative to elegant but expensive tiles. This is a relatively new material on the market that even a beginner can work with. PVC panels for walls - dense sheets in the shape of a rectangle. On the back of the cladding material there are special relief holes that provide strong adhesion and good ventilation. A 3D pattern is applied to the outside of the tile.

Plastic panels have a lot of advantages, which allowed the material to quickly become popular.

Among their advantages:

large size, due to which the installation will be many times faster
lack of requirements for thorough cleaning of walls,
the possibility of independent high-quality installation,
good protection against the damp environment of the bathroom,
long service life
a huge range of diverse drawings,
low price.

Along with such seemingly indisputable advantages, there are panels and several disadvantages:

when ignited, the material releases toxic toxic substances,
the plastic is quite fragile, can not withstand an accidental blow,
not environmentally friendly
some people associate with office space.

Building and types

3d panels for the bathroom - a new, practical decorative material with which you can unrecognizably change the geometry of the space in this room. They are rectangular tiles that are glued to the walls of the bathtub of the room or fixed using a frame. Wall 3D panels are considered a more budgetary alternative to ceramic tiles. They come in 2 types:

Important! The price of 1 square meter of textured 3d PVC plastic for wall decoration starts from 3 thousand rubles, installation will cost homeowners 20% of the cost of the material. Metal 3d panels are more expensive and are made to order.

Mounting Methods

Simplicity of installation is one of the main advantages of three-dimensional panels, which distinguishes this material from ceramic tiles, which only a professional can lay with quality can be laid. There are 3 ways to install panels:

Interesting! Even if you do not decide to carry out the installation of the material yourself, the work of professional masters will cost quite cheap. Typically, the cost of installing 3d panels is 15-20% of the cost of the material.

Advantages

Until recently, only ceramic tiles were used for wall lining in the bathroom, and plastic was considered an economy-class material, unsuitable for repairing decoration of premises with a difficult microclimate. Modern panels made of PVC and aluminum at an affordable price have become a real alternative to ceramics, not inferior in terms of operation and decorative potential.

This material has the following advantages:

High installation speed. Sheathing the walls of the bathroom with this material is possible without the help of professional craftsmen. In addition, before installing the panels, there is no need to perform thorough and lengthy surface preparation. If necessary, they can be fixed even on top of the old finish, which speeds up, reduces the cost of the repair process.
Affordable cost. The price of 1 square meter of coating from a 3D panel is cheaper on average than decorative ceramic tiles, so using this practical material can reduce repair costs.
Long term of operation. High-quality textured plastic can last more than 15-20 years, and aluminum panels are used even longer.
Actual design. Three-dimensional finishing material opens up inexhaustible possibilities for creating a modern, attractive bathroom interior.

Experienced craftsmen argue that it is important to determine the desired "dose" of 3D panels in the interior of the bathroom. It is not necessary to upholstery all the walls, you can select only one surface or even a small section of the wall in order to correctly place accents.

Materials

Recently, textured 3d panels are a popular finishing material that is trusted by experienced craftsmen and homeowners. They have enormous decorative potential, diverse relief and colors, due to which they successfully fit into the interior of the room in any style. 3D panels are made of gypsum, wood, bamboo, aluminum or PVC. However, due to increased humidity and temperature differences in the bathroom, only 2 types of material with increased moisture resistance are used for wall decoration in it:

Note! In exceptional conditions, craftsmen can use gypsum or wood panels to decorate rooms with high humidity. However, the lining of the walls of the bathroom is made only with material with special water-repellent impregnation and in places where there is no risk of direct contact with water.

Features

This material is used to decorate walls and ceilings. Its main feature is the three-dimensionality of the image.

Panels of this type are made in several stages. First, an original drawing is created, a relief is developed, a graphic model is built. Then the sketch is transferred to the plastic panel, fixed, processed. And then the final finishing of the panel takes place.

3D panels are made from:

3D plastic panels are divided into smooth, mirrored, perforated and textured. The first two types are good for walls, perforated are used in the design of heating radiators.

Drawing

The volumetric pattern applied to the surface of the panels creates a feeling of “living walls”. He can continue the space, divide it into zones or collect them together. Huge images have a unique ability to modify, depending on the play of light. Decor ranges from contrasting, embossed patterns to light, neutral subjects. This property of the panels allows the use of the material in many interiors.

Anything can act as an image: plants, animals, faces, buildings. There are no restrictions, designers themselves come up with a theme. Thanks to the three-dimensional drawing, the rooms decorated with PVC 3D panels look luxurious, presentable and unusual.

Panels can be decorated with all kinds of patterns, ornaments, geometric shapes. Images of water, fish, palm trees, birds, flowers are most suitable for lining bathrooms.

Color spectrum

Panels with a 3D effect today are presented in blue, blue, pink, brown, black and many other colors. For lovers of creative decor, it is possible to recommend panels with a gilding effect or using mangrove veneer. It gives an amazing, extraordinary effect.

For the bathroom, all of the above colors are suitable. The drawing can be drawn through the entire wall, or you can accentuate with it the area above the bathroom. It is better to choose an ornament, depending on the layout of the room and in accordance with the taste of the owner.

The geometry of the bathroom can be changed, due to the color and pattern on the panels. For example, a vertical ornament will make the room visually higher, and a horizontally placed pattern will create the illusion of a lower ceiling. Rhombuses, dots, squares, circles, lace, ovals will make the interior more comfortable and aesthetic.

Benefits

This modern material has a number of qualities that make it one of the most popular. These include:

ease,
ease of attachment
affordable cost
three-dimensionality
quick installation times
variety of decor.

3D plastic panels attach much faster than other finishing materials. They can be glued directly to the wall or to the frame.

Fragments of the right size are easily cut with a knife, a hacksaw. The work is quite easy, even a layman can do it. The panels are rectangular in shape. They are much larger in size than tiles.

On the back of the strips there is a special perforation for easier installation. The clutch is high quality and fast. The material has high water resistance, retains heat well, provides sound insulation.

3D-drawing brings the material into the line of innovative. A variety of colors, textures, photo printing options allows you to create a truly magnificent design. Plastic panels with a 3D-pattern can completely change the interior of the bathroom.

What are the panels

Manufacturers offer a wide range of 3d plates, because wall panels are made of various materials having their own advantages and disadvantages.

Gypsum panels. Flexible and plastic gypsum allows you to realize a wide variety of patterns and textures, and a wall made up of several such panels seems solid, since the gaps between them can easily be discreetly covered with the same gypsum. In addition, this material is colorable. The disadvantage is the significant weight of gypsum panels compared to plastic or MDF.
Plastic panels. Considered a budget option. In addition, they are moisture resistant and lighter. Wall panels made of plastic can be painted, and their installation is quite simple: they are attached to the wall with glue or a metal frame. The disadvantage is their flammability, because of which it is impossible to use 3D panels for walls in the interior of the living room directly next to the fireplace.
MDF panels. They are made from wood fibers by gluing. The material is environmentally friendly and reliable, but much cheaper than wood. It features high performance and reliability. It is used for decoration of rooms with humidity not more than 80%. Embossed panels of pressed wood fibers are attached to the wall using brackets. The advantages include high noise and heat insulation. MDF wall panels can be painted and laminated. Of the minuses, we highlight the need for careful care of them, since over time it somewhat loses its appearance.
Bamboo panels. Natural wood materials are also popular. Most often used for the manufacture of volumetric decorative bamboo plates. Low cost, environmental friendliness, ease of installation and excellent appearance open up many opportunities to use bamboo 3d panels in the interior. However, unfortunately, such panels are short-lived and have low moisture resistance, therefore they are not very suitable for a bathroom or kitchen. Usually they are used in bedrooms or living rooms.
Aluminum panels. A volumetric image on the surface of aluminum plates is obtained by the method of perforation, and the top is covered with a special film that serves to protect the panel from corrosion. Therefore, aluminum wall panels are quite moisture resistant. In addition, they are resistant to fire and very durable. Therefore, it is permissible to use aluminum 3d panels for walls in the interior of the living room with a fireplace. This material does not require special care and is practically not contaminated, however, such luxury is worth it accordingly.

Room interior with 3D panel

3D panel squares

In order to make it easier to determine the choice of panel material for your interior, we present their comparative table:

Textured

Textured are called panels with a relief uneven surface. Most often, this option is chosen by those who want to visually increase the space, making it the most harmonious. Drawings on textured panels are usually abstract, represent a wave or geometric shapes. If you use such panels to decorate the ceiling, the room will appear taller and more spacious.

The only drawback here is the difficulty in maintenance, since the embossed surface involves a longer cleaning.

Smooth

Smooth panels - a great opportunity to improve the interior of the bathroom. Their surface is completely flat and does not contain roughness. Material - high quality polyvinyl chloride. The panels are good in that the range of colors is much higher - you can pick up one interesting color, as well as a whole gamut or pattern. Surface cleaning is an order of magnitude easier than textured varieties.

Installation tips

The first thing to do after receiving the long-awaited panels is not to install them immediately. Experts recommend waiting about two days for the material to get used to the temperature in the room, in this case it should be a bathroom. When the acclimatization time is over, you can proceed with the installation. Be sure to lay the panels on the floor and see what the finished drawing will look like.

There are two ways to install PVC panels - on glue and on the frame. You can choose the first method for those who have smooth and even walls. Attaching the facing material is not difficult - for this, use special glue or liquid nails.

It is worth noting that gluing is a good method only for lightweight panels.

Mounting to the frame is an alternative method that allows you to hide the curvature and uneven surfaces of the walls. The frame is made of different materials - plastic, wood or metal. The panels are fixed on top, for this they use self-tapping screws. It’s a good idea to install the frame in difficult places - the area where the pipes and wiring are located.

Installation of plastic PVC panels is a relatively simple matter, which can be dealt with in a few hours. However, if you feel insecure in this regard, have never dealt with repairs, or simply do not want to do this, seek the help of specialists. The work of the masters is usually inexpensive, and will cost up to 20% of the value of your order.

Pattern selection

Volumetric, beautiful paintings on the walls are always unusual and presentable.Such images can not only visually increase the space, but also look original in different lighting conditions. The good news is that there are no restrictions on the choice of drawing, a huge assortment allows, indeed, to give free rein to imagination. Water-related patterns are best suited for bathroom lining. It can be a marine theme, the image of bright tropical fish, drops of water, coral, sandy beach.

Today, PVC panels are presented in a variety of shades. from classic white to spectacular golden and silver tones. When choosing a picture, designers are advised to proceed from their own sense of style, favorite topics, a combination of shades.

The most familiar colors that never bother are all shades of blue and blue. It is good to dilute them with paints of milk, white, sand, greenish tones. This will create the effect of being on the beach, giving the room freshness and coolness.

Bright bathrooms in green and yellow shades look quite interesting. If you like these rich colors, pick a natural theme. Fruits, trees, birds, images of tropical animals are well suited. A huge charge of vivacity and positive mood will give orange and peach panels. But romantically-minded natures, it would be a good idea to install pinkish panels with drawings of flowers, for example, water lilies.

When purchasing a facing material, you also need to think not only about the drawing, but also how it will be located. The image can be placed on the entire wall, or can only be above the bathroom, creating an emphasis on one area. It must be remembered that vertical drawings make the room taller, but horizontal ones, on the contrary, “lower” the ceiling.

One of the most interesting collections for the bathroom will be Panda and Novita. Here you can find not only classic marine themes, but also such stylish solutions as panels in the style of Provence and retrostyle. Panels with lace ornaments, images of birds of paradise and oriental patterns look gorgeous. A very interesting collection of PVC panels with 3D-drawing and the company E-Plast. A huge assortment includes a variety of shades, as well as elegant collections with a flicker effect.

Tips for installing plastic panels - in the next video.

The properties

Such material does not require special care, you can do with simple household chemicals to clean the panels. The material is environmentally friendly, not afraid of moisture. They can decorate the bathroom completely non-standard, thanks to a wide range of colors and drawings in 3D graphics.

The material has a glossy or voluminous surface. For a glossy finish, care is quite simple. For volumetric panels, special means are used.

The surface of the finishing material is smooth, not porous, does not corrode, rot. Plastic does not absorb impurities, it is perfectly washed. Due to the light weight, transporting the material is also not a problem.

Plastic lining perfectly hides communications, pipes, electrical wiring, defects and defects of the surfaces of walls, ceilings.

Mounting

Before starting the lining of the panels, it is necessary to give time for acclimatization, so the material is left in the room for about 48 hours. Then the order of fastening of the blocks is calculated, for this the panels are laid out or placed on the floor so that you can see the picture. On the walls, the plastic cladding can be fixed with glue or liquid nails. Previously, the walls must be treated with proto-fungal mixtures. In those places where pipes, communications, wiring are located, they make the casing with a frame, on which the panels will then be mounted.

Mounting on the frame is made in various ways: screws, castle method. At the end of the work, the ends are closed with corners or starting panels, sanitary sealant is applied. Facing begins with an entrance part of the room.

The frame method significantly reduces the size of the room, so it is most often used for spacious bathrooms. The crate is made frequent enough so that dents cannot subsequently form on the panels.

Use in the interior

Beautiful plastic panels with graphic 3D-patterns are able to transform the interior of the bathroom beyond recognition. A huge variety of drawings, colors will help to realize any idea and move away from the standard design.

For the bathroom, it is best to choose smooth panels. This will greatly facilitate the care of them. And if some part of the cladding requires replacement, then it will be easy and simple to do. As for the choice of color and pattern, it largely depends on the size of the room. If the bathroom is spacious, then you can use brighter or darker shades with large patterns. For a small room, it is better to opt for pastel colors.

To create a bright, original interior, you can use a combination of panels of different colors, textures, patterns. This material is able to simply unrecognizably change any space!

Watch the master class on wall decoration in the bathroom with plastic panels in the next video.